Dry-lay the tiles first to minimise the number of cut tiles and to ensure the shades are harmonics.

Mark the working lines using the wall as a guide.

Apply the adhesive following the manufacturer's instructions carefully.

Lay the tiles section by section, levelling each with its neighbour.

Lay the border tiles. Remember to have a grout line between the border tiles and the wall.

For wall tiles, mark out where the fixtures (e.g. light switches, etc. ) are located.

Take note of corners and the border around windows.

Leave the tiles to set.

The setting time will vary from a few hours to a few days, depending on the type of base surface and adhesive used.

Apply the grout and do the final clean up.