MML MOSAICS
| Type of Test | International Norm | International Standard | MML Typical Standard |
 Water Absorption |
ISO 10545-3 | ≤ 0.5% | Comply |
 Dimension |
|||
| Length & Width * | JIS A 5209:94 | ± 1.0mm | Comply |
| Thickness | JIS A 5209:94 | ± 0.8mm | Comply |
| Welding * | JIS A 5209:94 | Max. 1.5mm | Comply |
| Flatness of Surface * | |||
| Centre Curvature | ISO 10545-2 | ± 1.00% | ± 0.75% |
| Warpage | ISO 10545-2 | ± 1.00% | ± 0.75% |
| Edge Curvature | ISO 10545-2 | ± 1.00% | ± 0.75% |
 Modulus of Rupture |
ISO 10545-4 | Min. 35N/mm² | ≥ 42N/mm² |
 Deep Abrasion Test |
ISO 10545-6 | Max. 175mm³ | > 150 mm³ |
 Frost Resistance |
ISO 10545-12 | No visible alteration to surface | No visible alteration to surface |
 Chemical Resistance * |
ISO 10545-13 | Mfg to state classification | Resistant |
 Slip Resistance (Ramp Test) ** |
AS 4586 App D | - | R10 |
* Only applicable to tiles of size 25 x 25mm and 48 x 48mm
** Applicable to unglaze mosaics only for size 18 x 18mm, 25 x 25mm and 48 x 48mm
Note: The above generic MML Standard on Unglazed surface finishes serves as a general guideline only. Different types of tiles are made to meet the different performance requirements. For legal compliance or specific product technical performance, please request a confirmation or report from the MML sales & marketing team or their agent.
** Applicable to unglaze mosaics only for size 18 x 18mm, 25 x 25mm and 48 x 48mm
Note: The above generic MML Standard on Unglazed surface finishes serves as a general guideline only. Different types of tiles are made to meet the different performance requirements. For legal compliance or specific product technical performance, please request a confirmation or report from the MML sales & marketing team or their agent.
